How to Turn on MPG X570 Motherboard Without Case

The MPG X570 motherboard is a powerful and efficient component that enhances the performance of your computer system. However, in certain scenarios, such as when building a custom PC or troubleshooting issues, you may find yourself needing to turn on the MPG X570 motherboard without a case. While this may seem daunting at first, it can be easily accomplished by shorting the power switch pins on the motherboard. To do this, you’ll need to locate the power switch pins, which can be found in the motherboard's manual or by examining the motherboard itself. Once you’ve identified the power switch pins, you can short them by using a screwdriver or any other metallic object that only touches the two pins and nothing else.

Can You Turn on Motherboard Without Case?

Turning on a PC without a case or power switch is actually an exceedingly simple procedure. The case of a computer primarily serves as a protective housing for it’s components, offering support and preventing dust and debris from entering. However, the case itself isn’t essential for the basic function of a motherboard.

To establish a power connection, you need a power supply unit (PSU). The PSU is responsible for delivering power to all the components in the system. By connecting the PSU to the motherboard, you can power it up and subsequently turn on the PC.

To power on the motherboard, locate the power switch pins on the motherboard. These pins are usually labeled as PWR_SW or something similar, and you can find their placement in your motherboards manual. Once you’ve identified these pins, you can use a small metal object, like a screwdriver, to momentarily bridge the two pins. This simulates the action of pressing the power button on a case, initiating the boot-up process.

A case provides essential functions, such as cooling, dust protection, and electromagnetic shielding. Therefore, it’s advisable to reinstall your motherboard within a case as soon as possible for optimal performance, stability, and longevity of your system.

The Importance of Using a Case for Cooling: Discuss the Role of a Case in Cooling Down the Components of a Computer and Preventing Overheating. Explain the Potential Risks of Running a Motherboard Without a Case for an Extended Period of Time.

Using a case for cooling is crucial for maintaining the optimal temperature of computer components and preventing overheating. A case helps in directing airflow and dissipating heat generated by the internal hardware. Without a case, there’s a higher risk of inadequate airflow, leading to a build-up of heat and potential damage to the components. Running a motherboard without a case for an extended period may result in reduced performance, system instability, and potentially even permanent damage to the hardware.

There are different ways to turn on a motherboard, and one unconventional method involves using a screwdriver. By lightly touching a metal screwdriver to the two power switch header pins on the motherboard, you can effectively power on the system if all the connections are in place. This approach essentially mimics the action of pressing the power button on your computer case or using the onboard power button on the motherboard.

How Do You Turn on a Motherboard With a Screwdriver?

Turning on a motherboard with a screwdriver is a simple and convenient method when one doesn’t have access to the power button. To do this, locate the power switch header pins on the motherboard. Usually, they’re located near the bottom right-hand corner of the board, labeled as “PWR” or something similar.

Before proceeding, ensure that the power supply is connected to the motherboard and the necessary components such as the CPU, RAM, and graphics card are properly installed. Once everything is set, follow these steps.

First, locate a small, flat-headed screwdriver with a non-conductive handle. It’s crucial to ensure that the handle is non-conductive to avoid any potential electrical hazards.

Next, gently touch the metal tip of the screwdriver to both of the power switch header pins at the same time. Hold the screwdriver in this position for a split second, allowing the electrical current to flow through.

If the connection is made properly, the system will immediately power on. You’ll hear a slight click or a humming sound as the components receive power. At this point, you can safely remove the screwdriver.

It’s essential to exercise caution when using this method to avoid any mishaps. Always remember to touch only the power switch pins with the screwdriver and avoid making contact with any other pins or components on the motherboard.

Moreover, keep in mind that this method should only be used as a temporary solution or troubleshooting measure. Eventually, you should connect the power button from the case properly or fix any potential issues with the onboard power button on the motherboard.

Nonetheless, it should only be used sparingly and as a temporary solution until the primary power button is operational again.


This can be easily accomplished by using a screwdriver or any metal object that solely makes contact with the two pins and nothing else. By following this method, users can effectively power on their motherboard even without the presence of a case.

Scroll to Top